Direct answer

Do not convert GSM, caliper, points and flute with one universal formula. GSM describes mass per unit area; caliper or point thickness describes thickness; corrugated flute describes a combined profile and board construction. Write the board grade, construction, measured property, test method, conditioning, tolerance discussion and intended package performance separately.

Key takeaways

Use these points to control the next decision.

  • Equal GSM does not guarantee equal thickness, stiffness, surface or converting behavior.
  • Point thickness is a unit expression for caliper, not a paper grade or a strength guarantee.
  • A flute name without liner, medium, combined-board and performance information is incomplete.

Separate mass, thickness and construction

GSM expresses basis weight as grams per square metre. Caliper expresses material thickness under a defined measurement method. Points are commonly used to express thickness in thousandths of an inch. Corrugated flute describes the geometry of a fluted medium within a combined board, not a direct equivalent to either GSM or caliper.

Material furnish, density, coatings, moisture, compression history and manufacturing process can change the relationship between mass and thickness. A supplier-comparable specification therefore names the measured variable instead of relying on a conversion chart.

TermWhat it describesWhat it does not prove
GSMMass per unit areaThickness, stiffness, crush strength or print result
CaliperThickness under a stated methodBoard grade, density or package performance
Point / PTThickness unit: 0.001 inch per pointMaterial composition or strength
FluteCorrugated profile within a board constructionComplete liner, medium or performance specification

Specify folding-carton board by grade and measured properties

For a folding carton, state the paperboard grade or agreed supplier grade, nominal caliper, basis weight when relevant, surface and print side, coating or barrier, grain direction, recycled-content or sourcing evidence requirements, and the intended conversion process.

Link the material specification to package geometry and use. Creasing, folding, embossing, foil, windowing, gluing and product load can all change the appropriate board choice. Approve a production-relevant sample rather than a number in isolation.

  • Board grade or controlled supplier grade
  • Nominal caliper and stated test method
  • Basis weight if commercially relevant
  • Grain direction and print surface
  • Coating, barrier or lamination
  • Critical converting and package-use requirements

Keep rigid-box board and wrap specifications separate

A rigid setup box typically combines a structural board with a separate wrap or lining material. Record greyboard or chipboard thickness, density or grade direction, moisture and flatness expectations where relevant, plus wrap-paper grade, weight or caliper, grain, print, finish and adhesive system.

Do not describe the finished wall with only the wrap-paper GSM. The board, wrap, adhesive, turned edges, joints and geometry work as a system and should be reviewed through structure and presentation samples.

Write the complete corrugated-board construction

For corrugated packaging, identify single-face, single-wall, double-wall or other construction; flute combination; liner and medium grades or agreed performance specification; board orientation; joint and closure; converting method; and required tests or package performance.

TAPPI maintains corrugated-packaging technical resources, publications and testing methods. Use the relevant standard or laboratory method for the property being controlled instead of treating a flute letter as a complete strength specification.

Specification layerExample fieldWhy it matters
ConstructionSingle-wall or double-wallDefines number and arrangement of components
FluteAgreed flute or flute combinationAffects thickness, cushioning and converting
ComponentsLiner and medium gradesControls material basis and variability
PerformanceRelevant board or box test requirementLinks material to use-case decision
Pack designDimensions, joint, closure and orientationDetermines finished package behavior
Primary references

Sources and scope

These references support the decision framework. They do not imply that MSQ PACK, a supplier, a package or a project holds a certification or has passed a named test.

  1. TAPPI Corrugated Packaging resources
  2. TAPPI Standards, Useful Methods and Technical Information Papers
  3. TAPPI Corrugated Packaging Division